This post is part of a series, which serves to provide hands-on information and resources for authors and editors.
Things have gotten busy in scholarly publishing: These days, a new article gets published in the 50,000 most important peer-reviewed journals every few seconds, while each one takes on average 40 minutes to read. Hundreds of thousands of papers reach the desks of editors and reviewers worldwide each year and 50% of all submissions end up rejected at some stage.
In a nutshell: there is a lot of competition, and the people who decide upon the fate of your manuscript are short on time and overworked. But there are ways to make their lives a little easier and improve your own chances of getting your work published!
Well, it may seem obvious, but before submitting an academic paper, always make sure that it is an excellent reflection of the research you have done and that you present it in the most professional way possible. Incomplete or poorly presented manuscripts can create a great deal of frustration and annoyance for editors who probably won’t even bother wasting the time of the reviewers!
This post will discuss 7 steps to the successful publication of your research paper:
1. Check Whether Your Research Is Publication-Ready
Should you publish your research at all?
If your work holds academic value – of course – a well-written scholarly article could open doors to your research community. However, if you are not yet sure, whether your research is ready for publication, here are some key questions to ask yourself depending on your field of expertise:
- Have you done or found something new and interesting? Something unique?
- Is the work directly related to a current hot topic?
- Have you checked the latest results or research in the field?
- Have you provided solutions to any difficult problems?
- Have the findings been verified?
- Have the appropriate controls been performed if required?
- Are your findings comprehensive?
If the answers to all relevant questions are “yes”, you need to prepare a good, strong manuscript. Remember, a research paper is only useful if it is clearly understood, reproducible and if it is read and used.
2. Choose An Article Type
The first step is to determine which type of paper is most appropriate for your work and what you want to achieve. The following list contains the most important, usually peer-reviewed article types in the natural sciences:
Full original research papers disseminate completed research findings. On average this type of paper is 8-10 pages long, contains five figures, and 25-30 references. Full original research papers are an important part of the process when developing your career.
Review papers present a critical synthesis of a specific research topic. These papers are usually much longer than original papers and will contain numerous references. More often than not, they will be commissioned by journal editors. Reviews present an excellent way to solidify your research career.
Letters, Rapid or Short Communications are often published for the quick and early communication of significant and original advances. They are much shorter than full articles and usually limited in length by the journal. Journals specifically dedicated to short communications or letters are also published in some fields. In these the authors can present short preliminary findings before developing a full-length paper.
3. Choose a Journal
Are you looking for the right place to publish your paper? Find out here whether a De Gruyter journal might be the right fit.
Submit to journals that you already read, that you have a good feel for. If you do so, you will have a better appreciation of both its culture and the requirements of the editors and reviewers.
Other factors to consider are:
- The specific subject area
- The aims and scope of the journal
- The type of manuscript you have written
- The significance of your work
- The reputation of the journal
- The reputation of the editors within the community
- The editorial/review and production speeds of the journal
- The community served by the journal
- The coverage and distribution
- The accessibility (open access vs. closed access)
4. Construct Your Paper
Each element of a paper has its purpose, so you should make these sections easy to index and search.
Don’t forget that requirements can differ highly per publication, so always make sure to apply a journal’s specific instructions – or guide – for authors to your manuscript, even to the first draft (text layout, paper citation, nomenclature, figures and table, etc.) It will save you time, and the editor’s.
Also, even in these days of Internet-based publishing, space is still at a premium, so be as concise as possible. As a good journalist would say: “Never use three words when one will do!”
Let’s look at the typical structure of a full research paper, but bear in mind certain subject disciplines may have their own specific requirements so check the instructions for authors on the journal’s home page.
4.1 The Title
It’s important to use the title to tell the reader what your paper is all about! You want to attract their attention, a bit like a newspaper headline does. Be specific and to the point. Keep it informative and concise, and avoid jargon and abbreviations (unless they are universally recognized like DNA, for example).
4.2 The Abstract
This could be termed as the “advertisement” for your article. Make it interesting and easily understood without the reader having to read the whole article. Be accurate and specific, and keep it as brief and concise as possible. Some journals (particularly in the medical fields) will ask you to structure the abstract in distinct, labeled sections, which makes it even more accessible.
A clear abstract will influence whether or not your work is considered and whether an editor should invest more time on it or send it for review.
Keywords are used by abstracting and indexing services, such as PubMed and Web of Science. They are the labels of your manuscript, which make it “searchable” online by other researchers.
Include words or phrases (usually 4-8) that are closely related to your topic but not “too niche” for anyone to find them. Make sure to only use established abbreviations. Think about what scientific terms and its variations your potential readers are likely to use and search for. You can also do a test run of your selected keywords in one of the common academic search engines. Do similar articles to your own appear? Yes? Then that’s a good sign.
This first part of the main text should introduce the problem, as well as any existing solutions you are aware of and the main limitations. Also, state what you hope to achieve with your research.
Do not confuse the introduction with the results, discussion or conclusion.
Every research article should include a detailed Methods section (also referred to as “Materials and Methods”) to provide the reader with enough information to be able to judge whether the study is valid and reproducible.
Include detailed information so that a knowledgeable reader can reproduce the experiment. However, use references and supplementary materials to indicate previously published procedures.
In this section, you will present the essential or primary results of your study. To display them in a comprehensible way, you should use subheadings as well as illustrations such as figures, graphs, tables and photos, as appropriate.
Here you should tell your readers what the results mean.
Do state how the results relate to the study’s aims and hypotheses and how the findings relate to those of other studies. Explain all possible interpretations of your findings and the study’s limitations.
Do not make “grand statements” that are not supported by the data. Also, do not introduce any new results or terms. Moreover, do not ignore work that conflicts or disagrees with your findings. Instead …
Be brave! Address conflicting study results and convince the reader you are the one who is correct.
Your conclusion isn’t just a summary of what you’ve already written. It should take your paper one step further and answer any unresolved questions.
Sum up what you have shown in your study and indicate possible applications and extensions. The main question your conclusion should answer is: What do my results mean for the research field and my community?
4.9 Acknowledgments and Ethical Statements
It is extremely important to acknowledge anyone who has helped you with your paper, including researchers who supplied materials or reagents (e.g. vectors or antibodies); and anyone who helped with the writing or English, or offered critical comments about the content.
Learn more about academic integrity in our blog post “Scholarly Publication Ethics: 4 Common Mistakes You Want To Avoid”.
Remember to state why people have been acknowledged and ask their permission. Ensure that you acknowledge sources of funding, including any grant or reference numbers.
Furthermore, if you have worked with animals or humans, you need to include information about the ethical approval of your study and, if applicable, whether informed consent was given. Also, state whether you have any competing interests regarding the study (e.g. because of financial or personal relationships.)
The end is in sight, but don’t relax just yet!
De facto, there are often more mistakes in the references than in any other part of the manuscript. It is also one of the most annoying and time-consuming problems for editors.
Remember to cite the main scientific publications on which your work is based. But do not inflate the manuscript with too many references. Avoid excessive – and especially unnecessary – self-citations. Also, avoid excessive citations of publications from the same institute or region.
5. Decide the Order of Authors
In the sciences, the most common way to order the names of the authors is by relative contribution.
Generally, the first author conducts and/or supervises the data analysis and the proper presentation and interpretation of the results. They put the paper together and usually submit the paper to the journal.
Co-authors make intellectual contributions to the data analysis and contribute to data interpretation. They review each paper draft. All of them must be able to present the paper and its results, as well as to defend the implications and discuss study limitations.
Do not leave out authors who should be included or add “gift authors”, i.e. authors who did not contribute significantly.
6. Check and Double-Check
As a final step before submission, ask colleagues to read your work and be constructively critical.
Make sure that the paper is appropriate for the journal – take a last look at their aims and scope. Check if all of the requirements in the instructions for authors are met.
Ensure that the cited literature is balanced. Are the aims, purpose and significance of the results clear?
Conduct a final check for language, either by a native English speaker or an editing service.
7. Submit Your Paper
When you and your co-authors have double-, triple-, quadruple-checked the manuscript: submit it via e-mail or online submission system. Along with your manuscript, submit a cover letter, which highlights the reasons why your paper would appeal to the journal and which ensures that you have received approval of all authors for submission.
It is up to the editors and the peer-reviewers now to provide you with their (ideally constructive and helpful) comments and feedback. Time to take a breather!
If the paper gets rejected, do not despair – it happens to literally everybody. If the journal suggests major or minor revisions, take the chance to provide a thorough response and make improvements as you see fit. If the paper gets accepted, congrats!
It’s now time to get writing and share your hard work – good luck!
If you are interested, check out this related blog post
[Title Image by Nick Morrison via Unsplash]